Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLA+ Black 
PLA+ Pink 
PLA+ Orange 
PLA + Skin Tone 
PLA+ Yellow 
PLA+ Blue Brand: Yiqiu3D · Standard PLA snaps on thin walls and load-bearing parts, forcing reprints at the worst moment. This PLA+ is an impact-modified formulation with noticeably higher toughness and stiffness than basic PLA, so clips, hinges, and wearable parts hold up in daily use while keeping the easy printing you expect.
PLA+ adds an impact modifier to the standard PLA resin, which raises its toughness and elongation so thin walls and snap-fit features bend slightly under stress instead of cracking instantly. It stays stiff enough for structural parts while printing exactly like a friendly PLA. This grade is rated for a 220°C print temperature.
Full answers belowBest for: Ideal for models, prototypes and indoor decor where crisp detail and the lowest cost per part matter most - available in 9 colours; lead colour PLA+ White. Not ideal for: Not for hot-car interiors or load-bearing parts; use PETG or ABS where heat and impact resistance matter - available in 9 colours; lead colour PLA+ White.
Nozzle 200-230°C
Finding the right flesh tone for character models is a constant struggle. The 8-color range includes a realistic skin-tone shade alongside black, gray, pink, orange, red, yellow, and blue, making it a favorite for doll bodies, figurines, and display models that need natural tones right out of the spool.
Tangles and jams waste filament and patience. Each spool is laser-measured for diameter consistency, wound with even tension, vacuum sealed with a desiccant pouch, and batch-matched so every order prints the same.
PLA+ keeps all the beginner-friendly behavior of PLA: rated 220°C, low warp, low odor, no enclosure needed, and smooth feeding on Creality, Bambu Lab, Prusa, and Anycubic machines with little tuning.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Wholesale PLA+ prints best at 200-230°C nozzle.
| Nozzle Temp | 200-230°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.4 kg |
|---|---|
| Spool Size (L×W×H) | 20 × 20 × 6.5 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | wholesale-pla-3d-printer-filament-enhanced-toughness-8 |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
