Yiqiu3D Matte PLA+ Filament 1.75mm, High-Speed Anti-Glare

PLA+ Matte [Dopamine Color]

PLA+ Matte [Olive]

PLA+ Matte [Black]

PLA+ Matte [Red]

PLA+ Matte [Yellow]

PLA+ Matte [Silver]

Yiqiu3D Matte PLA+ Filament 1.75mm, High-Speed Anti-Glare

Brand: Yiqiu3D · Tired of glossy, glare-heavy prints that scream 'plastic' and show every layer line? Yiqiu3D Matte PLA+ delivers a velvety, anti-glare surface that masks layer steps, and its high-flow formulation keeps up with fast-speed printing without skipping or stringing.

Eight dopamine-ready matte tones - black
Each 1.75mm spool is wound with laser-measured diameter control and dry vacuum packing
Tuned for mainstream machines: print at nozzle 220°C with standard PLA speeds

Get a Quote Order on Alibaba →

Compare filaments

Diameter 1.75mm

Material PLA

Quick Answer

Why choose matte PLA+ over regular glossy PLA?

Matte PLA+ uses a low-gloss compound that scatters light instead of reflecting it, hiding layer lines and fingerprints. Because it also flows faster than standard matte blends, it supports high-speed printing at 220°C while keeping that soft, velvety surface finish.

Full answers below

Is it right for my project?

Best for: Best for art pieces, vases and figurines that benefit from a colour gradient in a single print - available in 9 colours; 1kg spools. Not ideal for: Avoid for load-bearing or heated applications; a PETG/ABS grade performs better there - available in 9 colours; 1kg spools.

Print settings

Nozzle 220°C

01 · Why this one

Product highlights

3 reasons

Eight dopamine-ready matte tones - black, white, red, carmine, yellow, silver, olive and dopamine color - give your parts a premium, low-reflectivity finish that photographs like a molded product, not a 3D print.

Each 1.75mm spool is wound with laser-measured diameter control and dry vacuum packing, so batch-to-batch consistency stays true from the first meter to the last, with less tangling and fewer failed retries.

Tuned for mainstream machines: print at nozzle 220°C with standard PLA speeds, and it runs beautifully on Bambu Lab, Creality and Prusa without exotic settings or a heated-chamber requirement.

Up Close

Gallery

Product Images

Spec Sheet

Close-up

Scene

Technical Data

Specifications

Diameter	1.75mm
Material	PLA

Print Profile

Yiqiu3D Matte PLA+ Filament 1.75mm, High-Speed Anti-Glare prints best at 220°C nozzle.

Nozzle Temp	220°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight	1.3 kg
Length	approx. 335m
Spool Size (L×W×H)	19.5 × 19.5 × 5.9 cm
Pack Format	Piece
Spool Type	Round Spool

Attributes

Country / Region	china
HS Code	39169050
Item No.	matte-pla-filament-high-speed-anti-glare-3d-printer
Origin	Other
Raw Material	Other
Print Size	Other
Product Weight	1kg
Main Downstream Platform	Other
Length	approx. 335m
Appearance	Round Spool

Before You Ask

Frequently Asked Questions

Why choose matte PLA+ over regular glossy PLA?

Will this filament work in my Bambu Lab or Creality printer?

Yes. It is 1.75mm and runs with standard PLA profiles on Bambu Lab, Creality, Prusa and Anycubic machines. No enclosure is needed; set the nozzle to 220°C and start with the brand's PLA preset.

What is the recommended nozzle and bed temperature?

Print with the nozzle at 220°C (data-sheet value) and a heated bed at 50-60°C. For a flatter, gloss-free look use a 0.4mm nozzle; the matte compound hides layer lines so you can also run slightly thicker layers at high speed.

How many prints can I get from one 1kg spool?

A 1kg spool yields roughly 330 meters of 1.75mm filament. A typical 10-15g model prints 60-100 times per spool; a full 250g vase prints about 4 times. Actual yield depends on infill and model size.

Do matte colors vary between batches?

Each of the 8 colors - black, white, red, carmine, yellow, silver, olive and dopamine - is batch-controlled at our factory and vacuum-sealed, so tone stays consistent within and across spools for repeat orders.

What print speeds does this matte PLA+ support?

It is formulated for high-speed printing: 150-300mm/s works well on fast machines with proper cooling, while 60-100mm/s is the safe range on standard printers. Slow down the first layer to 30-50mm/s for bed adhesion.

Is it for prototypes or finished parts?

Both. The matte surface looks like molded plastic, so it suits finished consumer parts, décor and display models; its PLA+ toughness also handles light functional use such as brackets, mounts and cases.

How should I store the filament?

Keep the spool in the sealed vacuum bag with the included desiccant when not printing. Store at room temperature away from direct sunlight and humidity; PLA absorbs little moisture, but dry storage guarantees first-layer consistency.

Documentation & Downloads

Everything we publish for this material, in one place.

Parameter Sheet — Yiqiu3D Matte PLA+ Filament 1.75mm, High-Speed Anti-Glare

Ready to Order

Get factory-direct pricing on Yiqiu3D Matte PLA+ Filament 1.75mm, High-Speed Anti-Glare

Not sure this is the right material? → Compare filaments

Get a Tailored Quote Order on Alibaba →

Yiqiu3D Matte PLA+ Filament 1.75mm, High-Speed Anti-Glare

Why choose matte PLA+ over regular glossy PLA?

Is it right for my project?

Print settings

Product highlights

Gallery

Product Images

Spec Sheet

Close-up

Scene

Specifications

Print Profile

Spool Specification

Attributes

Frequently Asked Questions

Documentation & Downloads

Get factory-direct pricing on Yiqiu3D Matte PLA+ Filament 1.75mm, High-Speed Anti-Glare

Explore more by topic

PLA+ Premium

Creality Ender 3 Print Settings for PLA and PETG

First Layer Adhesion: The Foundation of Every Successful Print

How to Fix PLA Warping — A Practical Guide

How to Prevent Stringing in 3D Prints

How to Store 3D Printing Filament (Long-Term & Short-Term)