PETG Dopamine Pale Pink PETG Dopamine Pale Pink
PETG Dopamine Peach Nude Pink PETG Dopamine Peach Nude Pink
PETG Dopamine Vine Purple PETG Dopamine Vine Purple
PETG Dopamine Pale Purple PETG Dopamine Pale Purple
PETG Dopamine Aqua Blue PETG Dopamine Aqua Blue
PETG Dopamine Fresh Cyan PETG Dopamine Fresh Cyan

PETG Filament 1.75mm 1kg Multi Color Impact Resistant

Brand: Yiqiu3D · A workshop fixture that cracks at the first knock is scrap. This Basic PETG grade flexes before it breaks, bonds layer to layer and shrugs off the damp of a busy workshop, so tool holders, jigs and brackets hold their fit through daily handling instead of splitting along the layer line. Printed at 230-260 °C it lays a dense bead with strong interlayer adhesion. Nine pastel references, 1 kg net filament per spool.

  • Lead color is Dopamine Coral Pink: a soft pastel coral that reads as a warm salmon pink on the shelf. Nine references are recorded in total
  • Low moisture uptake is the practical advantage: a spool that has been open in a damp room for weeks still feeds clean
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Material PETG
Quick Answer

What makes PETG the right choice for parts that take a knock?

PETG is a tougher polymer than standard PLA. Instead of cracking along the layer line it yields and flexes under impact, so brackets, clips, jigs and holders survive being dropped, stacked and handled. It also takes up far less moisture, which matters when a spool has been open in a damp workshop for weeks. The trade-offs are a softer, slightly glossier surface than PLA and a lower heat ceiling: for parts in sustained heat, switch to ABS or ASA. The recorded nozzle window for this grade is 230-260 °C.

Full answers below

Is it right for my project?

Best for: For workshop fixtures, tool holders and jigs that live in a damp or busy environment - available in 9 colours; 1kg spools; lead colour PETG Dopamine Coral Pink. Not ideal for: Avoid for parts in sustained heat; switch to ABS or ASA for higher service temperatures - available in 9 colours; 1kg spools; lead colour PETG Dopamine Coral Pink.

Print settings

Nozzle 230-260°C

01 · Why this one

Product highlights

2 reasons

Lead color is Dopamine Coral Pink: a soft pastel coral that reads as a warm salmon pink on the shelf. Nine references are recorded in total, from Pale Pink through Vine Purple to Fresh Cyan, so a color-coded tool board can be built from one supplier. Pigment is compounded into the resin before extrusion, so the tone runs through the wall of the part and the holder you print next month matches the one on the bench today. Quote the recorded color name exactly when you order.

Low moisture uptake is the practical advantage: a spool that has been open in a damp room for weeks still feeds clean, so there is no drying session between jobs. No heated chamber is needed and the 230-260 °C window runs on an open-frame machine, including Bambu Lab AMS and Creality Ender-class printers. Where a part sits in sustained heat, switch to ABS or ASA instead of pushing PETG.

Up Close

Gallery

Product Images

PETG Filament 1.75mm 1kg Multi Color Impact Resistant — Product ImagesPETG Filament 1.75mm 1kg Multi Color Impact Resistant — Product ImagesPETG Filament 1.75mm 1kg Multi Color Impact Resistant — Product ImagesPETG Filament 1.75mm 1kg Multi Color Impact Resistant — Product ImagesPETG Filament 1.75mm 1kg Multi Color Impact Resistant — Product ImagesPETG Filament 1.75mm 1kg Multi Color Impact Resistant — Product Images

Spec Sheet

PETG Filament 1.75mm 1kg Multi Color Impact Resistant — Spec Sheet

Close-up

PETG Filament 1.75mm 1kg Multi Color Impact Resistant — Close-up

Scene

PETG Filament 1.75mm 1kg Multi Color Impact Resistant — Scene
Technical Data

Specifications

Diameter 1.75mm
Material PETG

Print Profile

PETG Filament 1.75mm 1kg Multi Color Impact Resistant prints best at 230-260°C nozzle.

Nozzle Temp230-260°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.35 kg
Lengthapprox. 325m
Spool Size (L×W×H)21 × 21 × 7 cm
Pack FormatPiece
Spool TypeRound Spool

Attributes

Country / Regionchina
HS Code39169010
Item No.petg-multi-color-impact-resistant-batch
Material PETG
Raw Material PETG
Print Size 1.75mm
Net Weight 1KG Net
Length approx. 325m
Appearance Round Spool
Scenario Bridge

Perfect for these projects

UV-Stable Filaments Built for 2–5 Year Outdoor Exposure

View solution →

Consistent Filament Across 50+ Printers — From First Spool to the Last

View solution →
Before You Ask

Frequently Asked Questions

What makes PETG the right choice for parts that take a knock?
PETG is a tougher polymer than standard PLA. Instead of cracking along the layer line it yields and flexes under impact, so brackets, clips, jigs and holders survive being dropped, stacked and handled. It also takes up far less moisture, which matters when a spool has been open in a damp workshop for weeks. The trade-offs are a softer, slightly glossier surface than PLA and a lower heat ceiling: for parts in sustained heat, switch to ABS or ASA. The recorded nozzle window for this grade is 230-260 °C.
Which printers does this spool fit?
It is a standard 1.75 mm round spool, so it fits open-feed 1.75 mm FDM machines: Bambu Lab AMS-based printers, Creality Ender-class printers and comparable systems with an external spool holder. The recorded diameter is 1.75 mm and the spool is the normal 1 kg format, so no adapter is needed on a machine with a standard holder. Tell us your printer model, feed system and nozzle bore and we will confirm the fit before your order ships.
What print settings do you recommend?
Nozzle temperature 230-260 °C, the value recorded for this grade. Run toward the upper half of that window for thick layers and parts that must hold under load, and toward the lower half where surface finish matters more. This listing does not quote a bed temperature, a speed or a layer height, so take those from the profile published by your printer manufacturer and tune them from a test print on your own machine.
How much filament is on one spool, and how far does it go?
1 kg net filament per spool, about 325 m of 1.75 mm strand as recorded for this reference. That is the figure to put into a costing sheet: a 1 kg net spool at 1.75 mm carries a known material volume, so cost per fixture is directly comparable between suppliers. Quote the 1 kg net figure onward rather than the weight printed on the shipping carton, which also includes the spool and the packaging.
Which colors are available, and will a reorder match?
Nine pastel references are recorded for this item, led by Dopamine Coral Pink, then Pale Pink, Peach Pink, Peach Nude Pink, Vine Purple, Pale Purple, Light Purple, Aqua Blue and Fresh Cyan. Pigment is compounded into the resin before extrusion, so the color runs through the part rather than sitting on the surface. Production runs a single process window, so a reorder ships the same tone instead of a near match - which is what lets a distributor approve one reference and sell it as a repeatable line.
What should I print with it?
Workshop fixtures and tool holders, jigs and drill guides, brackets and clips, machine guards, storage bins and crates, outdoor equipment housings, garden hardware, signage and prototype enclosures - parts that have to survive being handled, dropped or left in a damp room. The pastel palette also suits display stands, retail props and color-coded tooling. Where very fine cosmetic surfaces are the priority, PLA or resin still finish cleaner.
How is the spool packed and stored?
Each roll ships vacuum sealed with a desiccant sachet inside the printed carton, so it arrives dry and ready to mount. PETG takes up little moisture compared with PLA, but a spool left open for months in a damp room will still print rough, so reseal it between jobs or keep it in a dry cabinet. Store it out of direct sunlight and away from heat, and leave the winding untouched: the strand is laid evenly so it feeds clean at the start of the next job.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on PETG Filament 1.75mm 1kg Multi Color Impact Resistant

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

How to Choose Filament for Functional Parts

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Dry PETG Filament (and Why It Matters)

→📐Guide

How to Prevent Stringing in 3D Prints

→📐Guide

How to Store 3D Printing Filament (Long-Term & Short-Term)

→