Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLA+ Black 
PLA+ Pink 
PLA+ Orange 
PLA+Skin Tone 
PLA+ Yellow 
PLA+ Blue Brand: Yiqiu3D · First-layer failures and brittle snaps eat into print time — Le Da PLA+ is formulated for strong layer adhesion and impact resistance, so parts come off the bed intact and stay that way.
PLA+ improves on standard PLA in two ways: impact modifiers raise toughness so parts resist cracking, and a refined blend improves layer adhesion, reducing warping and delamination during prints.
Full answers belowBest for: Great for signage, props and prototypes that need to look right rather than survive abuse - available in 9 colours; lead colour PLA+ White. Not ideal for: Avoid for anything outdoors or under sustained heat; choose ASA or ABS instead - available in 9 colours; lead colour PLA+ White.
Nozzle 200-230°C
black, gray, pink, orange, skin tone, red, yellow and blue — including skin tone for figurines and models, give creators a broad palette in one line.
Laser-measured 1.75mm diameter, roundness checks and tangle-free winding keep extrusion stable from the first layer to the last.
Prints at 220°C on Bambu Lab, Anycubic and other standard machines with simple settings, making it dependable for beginners and busy shops alike.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Le Da PLA+ Filament 1.75mm 8 Colors Enhanced Toughness prints best at 200-230°C nozzle.
| Nozzle Temp | 200-230°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.25 kg |
|---|---|
| Spool Size (L×W×H) | 22 × 20 × 6.5 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | le-da-pla-filament-8-colors-enhanced-toughness-3d-printer |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
