Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLAMacaronGoose Yellow 
PLAMacaronApricot Orange 
PLAMacaronLight Purple 
PLAMacaronPale Purple 
PLAMacaronPeach Pink 
PLAMacaronPale Pink Brand: Yiqiu3D · Model: PLAmkl0001 · Harsh, over-saturated colors spoil soft, delicate designs. This macaron silk PLA uses gentle low-saturation pastels — the kind of muted, creamy tones that make jewelry, gifts and décor look handmade and expensive.
Macaron silk PLA uses a low-saturation pastel palette combined with the glossy silk base, so colors stay muted, creamy and elegant instead of loud. It is a single-color series, so tone stays pure and even across every layer.
Full answers belowBest for: Suits premium packaging models and presentation pieces that must look expensive - available in 9 colours; 1kg spools; lead colour PLAMacaronCream Yellow. Not ideal for: Avoid for parts exposed to heat above ~60C; use ABS or ASA there - available in 9 colours; 1kg spools; lead colour PLAMacaronCream Yellow.
Nozzle 200-225°C
Silky smooth by nature: the high-gloss silk base glides through the hotend without clogging, so delicate pastel pieces print clean even on long, intricate runs.
no gradient surprises — with laser-measured 1.75 mm tolerance, machine winding and vacuum sealing on every 1 kg spool.
Simple to run: 220 °C on Bambu Lab, Creality, Prusa or Anycubic FDM printers with standard PLA settings
eco-friendly PLA base with a soft, pleasant printing odor.
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Yiqiu3D Silk Macaron PLA Filament 1.75mm 1kg, Pastel Low-Saturation Silky Finish, Non-Clogging prints best at 200-225°C nozzle.
| Nozzle Temp | 200-225°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Length | approx. 335m |
| Spool Size (L×W×H) | 20 × 20 × 5.6 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | silk-macaron-pla-filament-pastel-low-saturation-silky |
| Diameter | 1.75mm |
| Length | approx. 335m |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
