Why does matte PLA hide layer lines so well?
The matte finish scatters reflected light instead of mirroring it, so fine layer steps become visually invisible and the part reads as one smooth, molded surface — no sanding required.
Full answers below
![PLA Matte White [Qihang Edition Spool less]](/images/products/matte-pla-filament-refill-no-spool-3d-printer-filament-8/swatch-1.webp)
PLA Matte White [Qihang Edition Spool less] ![PLA Matte Sapphire Blue [Qihang Edition Spool less]](/images/products/matte-pla-filament-refill-no-spool-3d-printer-filament-8/swatch-3.webp)
PLA Matte Sapphire Blue [Qihang Edition Spool less] ![PLA Matte Chinese Red [Qihang Edition Spool less]](/images/products/matte-pla-filament-refill-no-spool-3d-printer-filament-8/swatch-4.webp)
PLA Matte Chinese Red [Qihang Edition Spool less] ![PLA Matte Orange [Qihang Edition Spool less]](/images/products/matte-pla-filament-refill-no-spool-3d-printer-filament-8/swatch-5.webp)
PLA Matte Orange [Qihang Edition Spool less] ![PLA Matte Brown [Qihang Edition Spool less]](/images/products/matte-pla-filament-refill-no-spool-3d-printer-filament-8/swatch-7.webp)
PLA Matte Brown [Qihang Edition Spool less] ![PLA Matte Army Green [Qihang Edition Spool less]](/images/products/matte-pla-filament-refill-no-spool-3d-printer-filament-8/swatch-8.webp)
PLA Matte Army Green [Qihang Edition Spool less] Matte PLA Filament 1.75mm 1kg Refill No-Spool
Brand: Yiqiu3D · Glossy PLA reflects light and shows every fingerprint? This matte PLA gives a velvety, low-gloss surface that hides layer lines and smudges, so prints look injection-molded right off the plate.
- Eight matte colors
- The no-spool refill format cuts plastic waste and cost
- It prints at 220°C with low warp on Bambu Lab
Diameter 1.75mm
Material PLA
Quick Answer
Is it right for my project?
Best for: Suits a broad range of 3D printing projects across prototyping and production - available in 9 colours; 1kg spools. Not ideal for: Performance varies with demanding heat, chemical or food-contact needs - ask us for a suitable alternative - available in 9 colours; 1kg spools.
Print settings
Nozzle 195-225°C
01 · Why this one
Product highlights
3 reasonsEight matte colors
White, Gray, Sapphire Blue, China Red, Orange, Yellow, Brown and Army Green — cover studio neutrals and bold accents in one consistent low-gloss line.
The no-spool refill format cuts plastic waste and cost, while laser-measured 1.75mm diameter and uniform winding keep quality as reliable as spooled filament.
It prints at 220°C with low warp on Bambu Lab, Creality, Prusa and Anycubic machines, fitting standard reusable spools without any special profile.
Up Close 
Gallery
Product Images
Spec Sheet
Close-up
Scene
Technical Data
Specifications
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Print Profile
Matte PLA Filament 1.75mm 1kg Refill No-Spool prints best at 195-225°C nozzle.
| Nozzle Temp | 195-225°C |
|---|
Spool Specification
Spool details for your feeding and handling setup.
| Gross Weight | 1.05 kg |
|---|---|
| Length | approx. 335m |
| Spool Size (L×W×H) | 20 × 20 × 5.5 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
Attributes
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | matte-pla-filament-refill-no-spool-3d-printer-filament-8 |
| Diameter | 1.75mm |
| Length | approx. 335m |
| Appearance | Round Spool |
Before You Ask
Frequently Asked Questions
Why does matte PLA hide layer lines so well?
The matte finish scatters reflected light instead of mirroring it, so fine layer steps become visually invisible and the part reads as one smooth, molded surface — no sanding required.
Will the refill fit my printer?
Yes — it is a 1.75mm, 1kg refill without a spool; mount it on any standard reusable spool and it feeds Bambu Lab, Creality, Prusa, Anycubic and most FDM printers normally.
What print settings should I use?
Set the nozzle to 220°C, the bed to 45-60°C, print the first layer at 20-30mm/s, and run 40-70mm/s for a uniform matte texture.
How much can I print from one 1kg refill?
One 1kg refill holds roughly 330 meters of 1.75mm filament — about 20-40 medium display models or several larger props, depending on infill.
What do the 8 matte colors look like?
White and Gray are clean neutrals, Sapphire Blue is deep and rich, China Red is a strong accent, Orange, Yellow, Brown and Army Green round out earthy and bold choices — all batch-controlled.
What speed range works best?
30-80mm/s is safe; staying at 40-70mm/s keeps the matte texture consistent and minimizes visible artifacts.
Is matte PLA for display parts or functional parts?
It is a display and aesthetics material — figurines, props, architectural models, toys and cosplay — while load-bearing functional parts are better in PETG or ABS.
How should I store the refill?
Keep the refill in its vacuum-sealed bag with desiccant, below 25°C and dry; if it becomes damp, dry at 45-50°C for 4-6 hours before printing.
Documentation & Downloads
Everything we publish for this material, in one place.
Ready to Order