Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
ABS+ Yellow With Spool 
ABS+ Purple Without Spool 
ABS+ Mint Without Spool 
ABS+ Light Blue Without Spool 
ABS+ Dark Blue Without Spool Brand: Yiqiu3D · Model: ABS+ · Empty spools pile up as plastic waste and inflate shipping costs for high-volume shops. Our PETG is offered both on spools and as spool-less filament coils, so bulk users cut packaging cost and waste while still getting the impact toughness and moisture resistance that PLA cannot match.
PETG is a glycol-modified polyester with real impact strength and flexibility, so parts deform under load instead of shattering like PLA, while its chemistry resists moisture and many chemicals. That combination makes it the default for functional parts that must survive daily handling. This grade is rated for a 220°C print temperature.
Full answers belowBest for: Suits outdoor equipment housings and garden hardware that see rain and temperature swings - available in 8 colours; lead colour ABS+ Gray. Not ideal for: Not for optical clarity; use clear PC or cast acrylic when light transmission matters - available in 8 colours; lead colour ABS+ Gray.
Nozzle 230-260°C
Eight colors from mint, purple, and light blue to deep blue and classic red give you a full palette with a clean semi-gloss sheen, so functional parts look finished without any post-processing.
Reliability starts with the spool: each strand is laser-measured for diameter consistency, wound with even tension to prevent tangling, vacuum sealed with a desiccant pouch on spooled versions, and batch-matched for repeatable results.
PETG prints like a workhorse: rated 220°C, low warp, no enclosure needed, and smooth feeding on Creality, Bambu Lab, Prusa, and Anycubic machines, with spool-less coils feeding directly through a respooler or center-feed adapter.
| Diameter | 1.75mm |
|---|---|
| Material | PETG |
ABS 3D Printer Filament 1.75mm Tough Durable 8 Colors Spool or Spool-less Options prints best at 230-260°C nozzle.
| Nozzle Temp | 230-260°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 0.8 kg |
|---|---|
| Spool Size (L×W×H) | 20 × 20 × 6.5 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169010 |
| Item No. | abs-3d-printer-filament-tough-durable-8-colors-spool-or |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
