PLA+ Silk Dual Color [Red Blue]

PLA+ Silk Dual Color [Purple Gold]

PLA+ Silk Dual Color [Yellow Green]

PLA+ Silk Dual Color [Red Black]

PLA+ Silk Dual Color [Purple Silver]

PLA+ Silk Dual Color [Red Green]

iBOSS Silk Dual-Color PLA+ 1.75mm 1kg

Brand: Yiqiu3D · Gradient art that cracks at the seams is heartbreaking? iBOSS Dual-Color Silk PLA+ starts from a PLA+ base with toughening modifiers, so two-tone prints keep the glossy silk look AND survive shipping, handling and everyday use without snapping.

Eight designer two-tone blends
Uneven color joints and wobbly diameter ruin two-tone prints? Factory-controlled color-segment blending and a laser-measured 1.75 mm round profile keep transitions clean and extrusion smooth for the whole 1 kg spool.
PLA+ toughness without printer headaches: 220°C nozzle on Bambu Lab

Get a Quote Order on Alibaba →

Compare filaments

Diameter 1.75mm

Material PLA

Quick Answer

Why is this dual-color silk tougher than regular silk PLA?

The base resin is PLA+ — standard PLA modified with toughening additives that absorb impact instead of shattering — and the silk color segments are blended into this tougher base. You get the color-shift beauty of silk plus the crack resistance of PLA+, so finished pieces survive post-processing and shipping.

Full answers below

Is it right for my project?

Best for: For showpieces and retail displays that photograph well without post-processing - available in 9 colours; 1kg spools. Not ideal for: Not for outdoor signage - UV dulls the finish; switch to ASA instead - available in 9 colours; 1kg spools.

Print settings

Nozzle 200-225°C

01 · Why this one

Product highlights

3 reasons

Eight designer two-tone blends

Red-Blue, Blue-Green, Purple-Gold, Yellow-Green, Red-Black, Pink-Gold, Purple-Silver and Red-Green — give your catalog a full spectrum of silk color-shift showpieces from a single SKU family.

Uneven color joints and wobbly diameter ruin two-tone prints? Factory-controlled color-segment blending and a laser-measured 1.75 mm round profile keep transitions clean and extrusion smooth for the whole 1 kg spool.

PLA+ toughness without printer headaches: 220°C nozzle on Bambu Lab, Creality or Anycubic machines, forgiving bed adhesion and standard PLA-style settings make it a dependable silk for shops and hobbyists alike.

Up Close

Gallery

Product Images

Spec Sheet

Close-up

Scene

Technical Data

Specifications

Diameter	1.75mm
Material	PLA

Print Profile

iBOSS Silk Dual-Color PLA+ 1.75mm 1kg prints best at 200-225°C nozzle.

Nozzle Temp	200-225°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight	1.35 kg
Length	Contact Customer Service
Spool Size (L×W×H)	20 × 20 × 6.2 cm
Pack Format	Piece

Attributes

Country / Region	china
HS Code	39169050
Item No.	iboss-silk-dual-color-pla-3d-printer-filament-8-two-tone
Product Name	Silk Two-Color
Grade	Contact Customer Service
Cross-Section	Rectangular
Item No.	Silk Two-Color
Application	3D Printing
Appearance	Contact Customer Service
Length	Contact Customer Service

Before You Ask

Frequently Asked Questions

Why is this dual-color silk tougher than regular silk PLA?

Will it work with my printer?

Yes — it is a standard 1.75 mm round filament that works on any single-nozzle FDM printer, including Bambu Lab, Creality and Anycubic machines, with direct-drive or Bowden extruders.

What print settings give the best two-tone result?

Use the listed 220°C nozzle with a bed around 50-60°C and moderate cooling. For the cleanest color segments and glossiest surface, print outer walls at 30-60 mm/s.

How long does one spool last?

A standard 1 kg spool of 1.75 mm filament holds roughly 330 meters — enough for dozens of small figurines, vases or trophies, depending on infill density and part size.

Do the two-tone blends look consistent between spools?

Yes. Each two-tone blend is produced from the same masterbatch pairings and visually checked before packing, so Red-Blue ordered this month matches Red-Blue next month. Keep the spool sealed with desiccant to protect the pigment.

How fast can I print it?

Silk filaments prefer moderate speed: 30-60 mm/s gives the best luster and cleanest transitions, with 60-100 mm/s possible on simple geometry. Test a calibration piece before large batches.

Is it for decorative prints or functional parts too?

It is designed mainly for decorative and display work — art pieces, gifts, trophies and figurines — where the two-tone silk finish adds value. The PLA+ base also tolerates light functional use such as boxes and organizers.

How is it packaged and shipped?

Each spool is machine-wound, vacuum-sealed with a desiccant pouch and shipped in a protective box. Reseal the bag with desiccant when not printing and store in a dry, cool place.

Documentation & Downloads

Everything we publish for this material, in one place.

Parameter Sheet — iBOSS Silk Dual-Color PLA+ 1.75mm 1kg

Ready to Order

Get factory-direct pricing on iBOSS Silk Dual-Color PLA+ 1.75mm 1kg

Not sure this is the right material? → Compare filaments

Get a Tailored Quote Order on Alibaba →

iBOSS Silk Dual-Color PLA+ 1.75mm 1kg

Why is this dual-color silk tougher than regular silk PLA?

Is it right for my project?

Print settings

Product highlights

Eight designer two-tone blends

Gallery

Product Images

Spec Sheet

Close-up

Scene

Specifications

Print Profile

Spool Specification

Attributes

Frequently Asked Questions

Documentation & Downloads

Get factory-direct pricing on iBOSS Silk Dual-Color PLA+ 1.75mm 1kg

Explore more by topic

What Is Silk PLA? Properties, Uses and Print Tips

Silk PLA vs Matte PLA: Which Finish Is Right for Your Project?

PLA+ Premium

AMS Multi-Color Printing: Material Tips for Clean Color Changes

Creality Ender 3 Print Settings for PLA and PETG

First Layer Adhesion: The Foundation of Every Successful Print