Validated Parameter Cards
Community Print Profiles
3 parameter cards from our production floor, grouped by the printer model they are validated on.
Bambu Lab X1C (2 profiles)
Bambu Lab X1C — PETG
Starting profile from our production floor. PETG strings more than PLA — tune retraction on a single-tower test before the full plate.
- Nozzle
- 220–250°C
- Bed
- 70–80°C (glue stick on PEI recommended)
- Speed
- Start 150 mm/s; PETG prefers slower outer walls for gloss consistency
- Cooling
- Part cooling 30–50%; too much cooling weakens layer bonding
Bambu Lab X1C — PLA / PLA+
Starting profile from our production floor. Validate per batch with a temperature tower before committing to a full build plate.
- Nozzle
- 190–220°C
- Bed
- 55–60°C (PEI plate)
- Speed
- Start 200 mm/s; work up to 300+ mm/s after validation
- Cooling
- Part cooling ON from layer 2; 100% on bridges and overhangs
Creality Ender 3 (1 profiles)
Creality Ender 3 — PLA / PLA+
Starting profile from our production floor. Bed leveling is the number-one variable on this machine — re-level before every new material lot.
- Nozzle
- 190–220°C
- Bed
- 55–60°C
- Speed
- Start 50 mm/s; tune up to 80–100 mm/s after first-layer validation
- Cooling
- Part cooling ON from layer 2; 100% on bridges and overhangs
Tuned a profile worth sharing?
Submit yours →