How does the matte finish work?
A matte modifier in the PLA compound diffuses reflected light, so printed surfaces look evenly low-gloss and layer lines are far less visible than on standard PLA.
Full answers below
PLA Matte Tri-Tone Rose Red Blue Green 
PLA Matte Tri-Tone Malachite 
PLA Matte Tri-Tone Moonstone 
PLA Matte Tri-Tone Rose Stone Matte PLA 3D Printer Filament 1.75mm 1kg Vacuum Sealed with Desiccant Low Glare Matte Finish FDM Printing
Brand: Yiqiu3D · Model: 202609300000800 · Special matte formulation scatters light so layer lines stay hidden
- finished miniatures show a low-glare
- Tri-color spools in stone-inspired colorways (fluorite
- Vacuum sealed with desiccant and neatly wound tangle-free
Diameter 1.75mm
Material PLA
Quick Answer
Is it right for my project?
Best for: Miniatures
Print settings
Nozzle 200-240°C · Bed 50-60°C
01 · Why this one
Product highlights
4 reasonsfinished miniatures show a low-glare, injection-molded look straight off the build plate.
Tri-color spools in stone-inspired colorways (fluorite, malachite, moonstone, rose stone, topaz and more) shift through three matte shades within one print.
Vacuum sealed with desiccant and neatly wound tangle-free
±0.03mm diameter tolerance keeps first-layer adhesion consistent across spools.
Up Close 
Gallery
Product Images
Spec Sheet
Close-up
Scene
Technical Data
Specifications
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Print Profile
Matte PLA 3D Printer Filament 1.75mm 1kg Vacuum Sealed with Desiccant Low Glare Matte Finish FDM Printing prints best at 200-240°C nozzle, 50-60°C bed.
| Nozzle Temp | 200-240°C |
|---|---|
| Bed Temp | 50-60°C |
Spool Specification
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
Attributes
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | matte-pla-3d-printer-filament-vacuum-sealed-desiccant-low |
| Bed Temperature | 60-80 |
| Applicable Industries | 3D Printing |
| Material | PLA |
| Diameter | 1.75mm |
| Weight | 1kg |
| Feature | Matte |
| Packing | Vacuum Sealed with Desiccant |
| Certificate | RoHS/REACH/MSDS available upon request |
| Brand | Yiqiu3D |
Before You Ask
Frequently Asked Questions
How does the matte finish work?
A matte modifier in the PLA compound diffuses reflected light, so printed surfaces look evenly low-gloss and layer lines are far less visible than on standard PLA.
Is this filament compatible with my printer?
Yes, it runs on mainstream FDM printers, both direct-drive and Bowden. No special hardware is needed; standard PLA accessories and bed adhesives work fine.
What temperature should I print at?
Please follow the recommended range on the spool label or contact us for the settings sheet; we keep published guidance aligned with the current material datasheet.
How many miniatures will one spool print?
It depends on model size, infill and layer height. Weigh one finished miniature and divide the spool net weight by that figure to estimate your yield.
Will the three colors transition smoothly?
Each spool carries three matte colors wound in sequence, so prints shift through the colorway gradually. Exact transition length varies with model geometry.
What are the limits of matte PLA?
Matte PLA is slightly more brittle than standard PLA, so it suits miniatures, decor and display pieces rather than load-bearing or thin snap-fit parts.
How is the filament packed and stored?
Every spool is vacuum sealed with a desiccant sachet. Store sealed spools in a cool dry place and re-dry after extended exposure to humid air.
Documentation & Downloads
Everything we publish for this material, in one place.
Ready to Order