Why does this PLA keep its color so consistent?
Pigment masterbatch is dosed by weight in controlled production batches, and every lot is recorded, so rolls from the same batch match closely and reorders by color stay predictable.
Full answers below
PLA 107 C Deep Yellow /Spool 
PLA Orange /roll 
PLA Red /roll 
PLA Blue /roll 
PLA Black /roll 
PLA Silver /roll PLA Filament 1.75mm
Brand: Yiqiu3D · Inconsistent color between rolls ruins production batches? This PLA locks each shade to a batch-controlled pigment dose, so reorders keep matching the first roll.
- Eight stable, saturated colors
- Laser-measured 1.75mm diameter and uniform
- It prints crisp details at 220°C with low odor on Bambu Lab
Diameter 1.75mm
Material PLA
Quick Answer
Is it right for my project?
Best for: A low-cost route to jigs and fixtures that see only light duty on the shop floor - available in 9 colours; lead colour PLA White /roll. Not ideal for: Not for heavy-duty tooling; a carbon-fibre or nylon grade performs better under load - available in 9 colours; lead colour PLA White /roll.
Print settings
Nozzle 190-220°C
01 · Why this one
Product highlights
3 reasonsEight stable, saturated colors
Deep Yellow 107C, Green, Orange, Red, Blue, Gray, Black and Silver — cover a full rainbow for signage, toys and prototyping.
Laser-measured 1.75mm diameter and uniform, tangle-free winding keep extrusion steady, and every spool is vacuum-sealed with desiccant for batch-consistent quality.
It prints crisp details at 220°C with low odor on Bambu Lab, Creality, Anycubic and other FDM machines, making it a dependable everyday workhorse filament.
Up Close 
Gallery
Product Images
Spec Sheet
Close-up
Scene
Technical Data
Specifications
| Diameter | 1.75mm |
|---|---|
| Material | PLA |
Print Profile
PLA Filament 1.75mm prints best at 190-220°C nozzle.
| Nozzle Temp | 190-220°C |
|---|
Spool Specification
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
What You Receive
Laser-measured 1.75mm diameter and uniform, tangle-free winding keep extrusion steady, and every spool is vacuum-sealed with desiccant for batch-consistent quality.
- Vacuum-sealed bag
- Desiccant pack
- Arrives dry and ready to print
Attributes
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | pla-filament-3d-printer-filament-8-vibrant-colors-deep |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Before You Ask
Frequently Asked Questions
Why does this PLA keep its color so consistent?
Pigment masterbatch is dosed by weight in controlled production batches, and every lot is recorded, so rolls from the same batch match closely and reorders by color stay predictable.
Will it work with my printer?
Yes — it is standard 1.75mm filament, compatible with Bambu Lab, Creality, Prusa, Anycubic and most FDM printers with a heated bed.
What settings should I use?
Set the nozzle to 220°C, the bed to 45-60°C, print the first layer at 20-30mm/s, and run 40-70mm/s for clean detail.
How long does one 1kg spool last?
One 1kg spool holds roughly 330 meters of 1.75mm filament — about 20-40 medium models depending on infill and size.
What are the 8 colors exactly?
Deep Yellow 107C is a warm traffic yellow; the line also includes Green, Orange, Red, Blue, Gray, Black and Silver, with Silver carrying a subtle metallic flake.
What speed range is recommended?
30-90mm/s is possible on most machines; 40-70mm/s gives the best balance of speed and surface detail.
Is this PLA for prototypes or finished products?
It is an everyday material for prototypes, toys, phone cases, signage and school projects — great for fast iteration and consumer products, while load-bearing parts go to PETG or ABS.
How should I store it?
Keep it in the vacuum-sealed bag with desiccant, dry and below 25°C; if stringy from humidity, dry at 45-50°C for 4-6 hours.
Documentation & Downloads
Everything we publish for this material, in one place.
Ready to Order