Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
ABS 1.75 Black 1kg 
ABS 1.75 Gray 1kg 
ABS 1.75 Yellow 1kg 
ABS 1.75 Orange 1kg 
ABS 1.75 Pink Red 1kg 
ABS 1.75 Brown 1kg Brand: Yiqiu3D · Model: 202608150000423 · Assembly gaps and oval bores are the usual reason ABS parts get rejected. This grade is aimed at that: a consistent 1.75 mm strand extruded from one compound, run inside an enclosed chamber with a heated bed so the part cools evenly and holds the geometry the CAD file asked for. Result: snap-fits, sockets and mating faces that line up on the first build instead of being reamed out afterwards.
Dimensionally, ABS holds its shape because of its own glass-transition behaviour, not an additive: a consistent 1.75 mm strand printed in a chamber that keeps the part warm enough to cool slowly, with a heated bed holding the first layer flat. Slow, even cooling is what limits the internal stress that makes straight walls bow. This grade is produced for that profile, so parts stay closer to drawing dimensions.
Full answers belowBest for: Suited to durable end-use parts needing impact strength plus heat tolerance, with vapour smoothing possible - available in 9 colours; 1kg spools; lead colour ABS 1.75 White 1kg. Not ideal for: Avoid for food-contact or high-emission environments without proper ventilation - available in 9 colours; 1kg spools; lead colour ABS 1.75 White 1kg.
Nozzle 240-260°C · Bed 80-100°C
The line is led by White, the cleanest neutral for housing and enclosure work, alongside Black, Water Blue, Gray, Yellow, Orange, Green, Pink Red and Brown - nine stocked colourways on one matte ABS surface. Every lot is extruded from a single pigment batch, so a repeat order matches the swatch you approved
that matters when one assembly is printed in more than one lot.
1.75 mm round strand on a round spool, approximately 330 m per 1 kg net filament per spool, wound in one continuous even pattern so feed tension stays steady at detail-layer heights. Steady feed plus even cooling is what keeps wall thickness and hole position repeatable across a batch, which is the difference between a part that assembles and one that needs rework.
ABS picks up moisture from humid air and then prints with surface bubbles and weak layer bonding. Keep the spool sealed until use and dry an open spool before a long build. Run it at anozzle in an enclosed chamber with a heated bed and ventilation
| Diameter | 1.75mm |
|---|---|
| Tolerance | ±0.03mm |
| Material | ABS |
Yiqiu3D ABS Filament 1.75mm 1kg prints best at 240-260°C nozzle, 80-100°C bed.
| Nozzle Temp | 240-260°C |
|---|---|
| Bed Temp | 80-100°C |
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Length | Filamentspool(m) |
| Spool Size (L×W×H) | 21 × 21 × 6 cm |
| Pack Format | Kg |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169090 |
| Item No. | abs-strong-durable-heat-resistant-colors |
| Material | ABS |
| Origin | Shenzhen |
| Suitable for Material | ABS |
| Print Size | Depends on 3D printer |
| Product Weight | 1.3kg |
| Length | Filamentspool(m) |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
