Yiqiu3D, Matte PLA, 1.75 mm, 1 kg, filament spool, retail packaging view Without Spool

Matte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool

Brand: Yiqiu3D · Model: Matte PLA 1.75mm 1kg · Glossy filament washes out detail under studio light? This matte PLA spreads light instead of bouncing it, so layer lines and surface texture stay readable in photos and stay subdued on finished parts. Sakura Pink arrives as a soft, non-reflective pink that reads true on camera. Consistent matte performance batch after batch, which matters when your listings, colour cards and repeat orders depend on the same look every time.

  • Diameter drift is the silent killer of long prints: thick sections jam a 0.4mm nozzle
  • Runs on the settings your farm already uses. Recommended nozzle temperature 195-225 degrees C: start at 210 and fine-tune per machine and speed. Each spool delivers 1kg net filament of 1.75mm PLA on a standard rigid spool
  • Buyers do not all load material the same way
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Tolerance ±0.03mm
Material PLA
Quick Answer

What is different about matte PLA compared with standard glossy PLA?

Matte PLA uses the same PLA polymer base as standard PLA but with a matting agent that scatters light, so printed surfaces come out satin instead of shiny. The practical effects: layer lines are far less visible on finished parts, and photos of your products do not blow out under studio lighting. Because the surface diffuses light, fingerprint marks and small scuffs also show less. Print behaviour stays close to standard PLA, and our recommended nozzle range for this Sakura Pink matte PLA is 195-225 degrees C.

Full answers below

Is it right for my project?

Best for: A practical material for shop-floor parts, prototypes and jigs - available in 2 colours; 1kg spools; lead colour With Spool. Not ideal for: Avoid for safety-critical parts without a certified grade; contact us for options - available in 2 colours; 1kg spools; lead colour With Spool.

Print settings

Nozzle 195-225°C · Bed 50-60°C

01 · Why this one

Product highlights

3 reasons

Diameter drift is the silent killer of long prints: thick sections jam a 0.4mm nozzle, thin sections starve the extruder and leave gaps. Yiqiu3D draws this 1.75mm filament to a tight diameter tolerance and winds it in an even, tangle-free pattern on a rigid spool. Fewer clogs, fewer failed hours, more sellable prints from every 1kg spool. Laser-measured diameter inspection is part of our outgoing quality check.

Runs on the settings your farm already uses. Recommended nozzle temperature 195-225 degrees C: start at 210 and fine-tune per machine and speed. Each spool delivers 1kg net filament of 1.75mm PLA on a standard rigid spool, a size that fits the spool holders of Bambu Lab and Creality Ender style FDM printers. Heated bed temperature was not specified on our data sheet, so please follow your matte PLA slicer profile.

Buyers do not all load material the same way, so we supply this Sakura Pink PLA in two delivery forms: with a spool, ready to hang on the holder, or without a spool as loose coiled filament for buyers who rewind onto their own carriers. Both carry the same 1.75mm PLA and the same 1kg net weight. Tell us which form you need and we quote it directly, plus RoHS documentation available upon request.

Up Close

Gallery

Product Images

Matte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool — Product ImagesMatte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool — Product ImagesMatte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool — Product ImagesMatte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool — Product ImagesMatte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool — Product ImagesMatte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool — Product Images

Spec Sheet

Matte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool — Spec Sheet

Close-up

Matte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool — Close-up

Scene

Matte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool — Scene
Technical Data

Specifications

Diameter 1.75mm
Tolerance ±0.03mm
Material PLA

Print Profile

Matte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool prints best at 195-225°C nozzle, 50-60°C bed.

Nozzle Temp195-225°C
Bed Temp50-60°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.3 kg
Spool Size (L×W×H)22 × 22 × 7 cm
Pack FormatPcs

Attributes

Country / Regionchina
HS Code39169050
Item No.matte-pla-sakura-pink-or-without
Material PLA
Origin Foshan
Applicable Raw Material PETGPLA
Print Size None
Product Weight 1KG
Smart Non-Smart
Wire Diameter 1.75mm
Scenario Bridge

Perfect for these projects

Consistent Filament Across 50+ Printers — From First Spool to the Last

View solution →

Jigs & Fixtures That Survive the Production Floor

View solution →
Before You Ask

Frequently Asked Questions

What is different about matte PLA compared with standard glossy PLA?
Matte PLA uses the same PLA polymer base as standard PLA but with a matting agent that scatters light, so printed surfaces come out satin instead of shiny. The practical effects: layer lines are far less visible on finished parts, and photos of your products do not blow out under studio lighting. Because the surface diffuses light, fingerprint marks and small scuffs also show less. Print behaviour stays close to standard PLA, and our recommended nozzle range for this Sakura Pink matte PLA is 195-225 degrees C.
Which 3D printers is this filament compatible with?
It is 1.75mm PLA for FDM printers, so it fits the spool holders and hotends used by Bambu Lab, Creality Ender style and Prusa style machines, and by most other 1.75mm FDM printers on the market. The standard rigid spool and the spool-less supply form both work with common holders, including automatic feeding systems. Before the first full run, confirm your nozzle diameter and use a matte PLA slicer profile; if you print at very high speed, run a small test print to tune flow first.
What printing parameters do you recommend?
Recommended nozzle temperature for this matte PLA is 195-225 degrees C. We suggest starting at 210 degrees C and adjusting within that window according to the machine, nozzle size and print speed, then verifying with a temperature tower. Heated bed temperature was not specified on our data sheet for this offer, so please follow the matte PLA profile of your slicer or printer vendor. If the spool has been stored in humid air, dry it before a long run and re-check the first layer.
What colour is Sakura Pink and are other colours available?
Sakura Pink is a soft, pale pink drawn in a matte, non-reflective finish - a colour that photographs well for gift, home decor and seasonal lines because it does not glare under studio light. This offer is a single colour, Sakura Pink, supplied with or without a spool; the only choice on the specification is the delivery form, not a colour range. Colour match against your reference sample can be discussed with us at order stage; confirm the exact shade before your first bulk order.
What applications is matte PLA best suited to?
Matte PLA suits parts where appearance matters more than mechanical load: retail and gift models, home decor, cosplay props, product prototypes, display pieces, architectural mock-ups, education and workshop parts, jigs and shop-floor fixtures. Sakura Pink in particular sells into gift, wedding, stationery and seasonal ranges. Because PLA is not a certified engineering grade, avoid safety-critical or high-temperature applications unless you specify a certified grade. Tell us your end use and we will tell you whether PLA or another material fits better.
How should the spools be stored before use?
Store in a cool, dry place out of direct sunlight and reseal the vacuum bag with its desiccant sachet after opening, so the filament is not exposed to humid air between runs. If a spool has been open in a humid workshop, dry it before a long print and re-check the first layer. Spools ship vacuum sealed with a desiccant sachet, and we can discuss the packing format for your market. Request a Quote and we will confirm packing, carton details and lead time for your order.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on Matte PLA Filament 1.75mm 1kg Sakura Pink With or Without Spool

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📐Guide

Silk PLA vs Matte PLA: Which Finish Is Right for Your Project?

→📦Product

PLA+ Premium

→📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Fix PLA Warping — A Practical Guide

→📐Guide

How to Prevent Stringing in 3D Prints

→