Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PLA Skin Tone 
PLA Orange 
PLA Red 
PLA Peanut Brown 
PLA Green 
PLA Jungle Green Brand: Yiqiu3D · Model: PLA 1.75mm 1kg · Recorded parameters: diameter 1.75 mm, round spool profile, net weight 1 kg per roll, recommended nozzle temperature 190-220 °C - a wide window that leaves room for fast printing. Winding is tension controlled, and the round cross-section keeps the extrusion bead consistent from the first layer of a fixture to the last.
Most workshop jigs are light-duty: a drill guide, a solder stand, a cable holder or a template only has to hold a position for a short time. PLA prints those parts quickly, keeps sharp detail, and is far cheaper than machining or moulding at low volume. Where load or heat is high, a carbon fibre or nylon grade is the better route.
Full answers belowBest for: A low-cost route to jigs and fixtures that see only light duty on the shop floor - available in 9 colours; lead colour PLA White. Not ideal for: Not for heavy-duty tooling; a carbon-fibre or nylon grade performs better under load - available in 9 colours; lead colour PLA White.
Nozzle 190-220°C · Bed 0-60°C
Prints on any standard 1.75 mm FDM machine, including Bambu Lab, Creality and Prusa-style printers, with a 0.4 mm nozzle and a heated bed
no enclosure needed. Finished parts can be drilled, tapped, filed and glued, which is what makes PLA a practical choice for jigs, alignment blocks and light-duty brackets.
| Diameter | 1.75mm |
|---|---|
| Tolerance | ±0.03mm |
| Material | PLA |
PLA Filament White Spool 1.75mm 1kg Yiqiu3D Budget prints best at 190-220°C nozzle, 0-60°C bed.
| Nozzle Temp | 190-220°C |
|---|---|
| Bed Temp | 0-60°C |
Spool details for your feeding and handling setup.
| Gross Weight | 1.35 kg |
|---|---|
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | pla-white-budget-bambu-lab-creality |
| Diameter | 1.75mm |
| Appearance | Round Spool |
| Diameter | 1.75mm |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
