Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
White per spool 
Yellow per spool 
Green per spool 
Blue per spool 
Transparent per spool 
Rose Red per spool Brand: Yiqiu3D · Model: PETG 1.75mm 1kg · Brittle filament is expensive: a jig or bracket cracks at the layer line the first time it is clamped, dropped or stacked, and an overnight run goes in the scrap bin. This PETG grade is formulated for impact toughness and layer bonding, so tool holders, fixtures and functional parts take knocks without cracking. Nozzle range 230-260 °C, 1.75 mm round profile, 1 kg net filament per spool, vacuum-sealed with a desiccant pack so the strand goes on the machine dry.
Basic PETG is a 1.75 mm glycol-modified PET filament for FDM printing. Compared with PLA it is tougher and far less brittle, bonds more strongly between layers and keeps working in damp or busy environments where parts are clamped and knocked about. It prints in a 230-260 °C nozzle window and needs no heated chamber, so it runs on ordinary open-frame machines.
Full answers belowBest for: For workshop fixtures, tool holders and jigs that live in a damp or busy environment - available in 9 colours; 1kg spools; lead colour Black per spool. Not ideal for: Avoid for parts in sustained heat; switch to ABS or ASA for higher service temperatures - available in 9 colours; 1kg spools; lead colour Black per spool.
Nozzle 230-260°C · Bed 70-80°C
Published parameters: PETG, 1.75 mm diameter, nozzle range 230-260 °C, heated bed 70-80 °C, round spool, 1 kg net filament per spool (approximately 325 m). PETG absorbs far less water than nylon or TPU, so parts keep their dimensions and strength in damp workshops
the strand is wound under tension so diameter and feed stay steady through a long job.
Fits standard 1.75 mm FDM printers and common 1 kg spool holders, including Bambu Lab and Creality style machines - no heated chamber required. Start from your printer PETG profile inside 230-260 °C with a 70-80 °C bed, and open the vacuum bag only when the spool goes on the holder
| Diameter | 1.75mm |
|---|---|
| Tolerance | +/-0.03mm |
| Material | PETG |
Basic PETG Filament 1.75mm 1kg Impact-Tough prints best at 230-260°C nozzle, 70-80°C bed.
| Nozzle Temp | 230-260°C |
|---|---|
| Bed Temp | 70-80°C |
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Length | 325m |
| Spool Size (L×W×H) | 20.5 × 20.5 × 6 cm |
| Pack Format | Piece |
Brittle filament is expensive: a jig or bracket cracks at the layer line the first time it is clamped, dropped or stacked, and an overnight run goes in the scrap bin. This PETG grade is formulated for impact toughness and layer bonding, so tool holders, fixtures and functional parts take knocks without cracking. Nozzle range 230-260 °C, 1.75 mm round profile, 1 kg net filament per spool, vacuum-sealed with a desiccant pack so the strand goes on the machine dry.
| Country / Region | china |
|---|---|
| HS Code | 39169010 |
| Item No. | basic-petg-impact-tough-damp-workshop-jigs |
| Product Name | 3D Printer Consumables PETG |
| Grade | PETG |
| Cross-Section | Round |
| Item No. | PETG |
| Application | 3D Printer Consumables |
| Appearance | Filament |
| Length | 325m |
Everything we publish for this material, in one place.
