ABS 1.75mm 1kg

Brand: Yiqiu3D · A part that has to stay in shape at 90-100 °C is where ordinary ABS gives up: the wall softens, the fit drifts and a bracket that measured true at the bench no longer holds. This grade is specified for functional parts up to roughly 90, with the setting confirmed for your application.

1.75mm diameter on a standard round spool
Drop-in on the 1.75mm FDM machines a workshop already runs - Bambu Lab
run it enclosed and a tall enclosure prints with straight sides. A standard spool holder or dry box takes the spool with no adapter.

Get a Quote Order on Alibaba →

Compare filaments

Diameter 1.75mm

Material ABS

Quick Answer

How hot can a part made from this ABS actually run?

The range is specified for functional parts up to roughly 90-100 °C - enclosures, automotive interior trim and workshop tooling. Below that band the part keeps its shape far better than a commodity ABS spool, which softens and drifts earlier. Above it, no unfilled ABS is the right answer: move to a higher-temperature grade rather than pushing this one. Printed in an enclosed chamber with a heated bed, the same part holds its fit after a hot duty cycle instead of creeping.

Full answers below

Is it right for my project?

Best for: For heat-resistant functional parts up to roughly 90-100C - enclosures, automotive trim and tooling - 1kg spools; lead colour Any color (note in order). Not ideal for: Not for outdoor long-term UV exposure - ASA resists sunlight far better - 1kg spools; lead colour Any color (note in order).

Print settings

Nozzle 240-260°C

01 · Why this one

Product highlights

3 reasons

1.75mm diameter on a standard round spool, 1 kg net filament per spool, and approximately 330 m of strand per spool, with a nozzle window of, with the setting confirmed for your application. Diameter and melt window are the two figures that decide whether a functional part prints clean, and both are held per spool, so a spool can move between machines without re-tuning the profile proved on the first one.

Drop-in on the 1.75mm FDM machines a workshop already runs - Bambu Lab, Creality, Prusa and similar - but ABS is bought with the enclosure in mind: an enclosed chamber, a heated bed and ventilation are required. Run it open-frame and the same file warps off the plate

run it enclosed and a tall enclosure prints with straight sides. A standard spool holder or dry box takes the spool with no adapter.

Up Close

Gallery

Product Images

Spec Sheet

Close-up

Scene

Available Colors

Technical Data

Specifications

Diameter	1.75mm
Material	ABS

Print Profile

ABS 1.75mm 1kg prints best at 240-260°C nozzle.

Nozzle Temp	240-260°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight	1.35 kg
Length	330 meters
Spool Size (L×W×H)	21 × 21 × 7 cm
Pack Format	Piece
Spool Type	Spooled

Attributes

Country / Region	china
HS Code	39169090
Item No.	abs-heat-resistant-high-temp-abs-parts-pens
Product Name	ABS Filament
Grade	WL-002
Cross-Section	Round
Item No.	WL-002
Application	3D printing filament
Appearance	Spooled
Length	330 meters

Scenario Bridge

Perfect for these projects

Jigs & Fixtures That Survive the Production Floor

View solution →

UV-Stable Filaments Built for 2–5 Year Outdoor Exposure

View solution →

Before You Ask

Frequently Asked Questions

How hot can a part made from this ABS actually run?

Will it print on the FDM machines a workshop already runs?

Yes. It is 1.75mm filament for standard FDM machines - Bambu Lab, Creality, Prusa and similar - and no adapter is needed for a standard spool holder or dry box. The one hard requirement is the machine setup: ABS needs an enclosed chamber, a heated bed and ventilation because it shrinks as it cools and releases fumes while printing. Open-frame printers can run the spool, but the part is likely to warp and split between layers.

What nozzle temperature should I set?

The nozzle window for this range is, with the setting confirmed for your application. Start in the middle of that window with the chamber closed and the bed heated, then move up only if a fast profile under-extrudes. Bed temperature settings stay with your own machine profile rather than with the spool.

How much filament is on one spool, and how far does it go?

Each spool carries 1 kg net filament per spool at 1.75mm diameter, which on this grade is approximately 330 m of strand. Usable length shifts a little with run tolerance, so plan a production batch from the slicer estimate for 1 kg on the 1.75mm profile you use and treat the metre figure as nominal.

What colour is available, and how do I lock a shade?

Colour on this item is made to order: there is no published swatch list, so state your target shade when ordering and the batch is run to it. That suits a reseller matching a house colour or an OEM programme with a fixed colour, and it means the shade approved in writing is the shade that is dosed. Place a trial order in the shade your line sells and compare it on the plate before committing to a range.

What is heat-resistant ABS best used for?

Parts that sit near heat and still have to hold their shape: enclosures and covers, automotive interior trim, jigs and tooling, brackets and functional assemblies that are checked with a gauge after printing. It is not the material for long-term outdoor exposure - sunlight degrades ABS, and ASA resists UV far better - so keep exterior parts on the ASA grade.

How is the spool packed, and how should I store it?

Each spool is vacuum sealed in a moisture-barrier bag with a desiccant pack and shipped on a round spool that fits standard holders and dry boxes. After opening, reseal the bag or move the spool into a dry box with desiccant and keep it out of direct sunlight: damp ABS pops in the nozzle and prints weak layers.

Documentation & Downloads

Everything we publish for this material, in one place.

Parameter Sheet — ABS 1.75mm 1kg

Ready to Order

Get factory-direct pricing on ABS 1.75mm 1kg

Not sure this is the right material? → Compare filaments

Get a Tailored Quote Order on Alibaba →