PETG Black PETG Black
PETG Pink PETG Pink
PETG Yellow PETG Yellow
PETG Gray PETG Gray
PETG Red PETG Red
PETG Purple PETG Purple

PETG Filament 1.75mm 1kg Single Color Smooth Flow Durable

Brand: Yiqiu3D · PETG that strings like cotton candy and clogs mid-print wastes hours - our PETG-Basic is formulated for smooth, low-string flow, so single-color production runs stay clean and operators stay calm.

  • Choose from a broad single-color range - black
  • 1kg spools (340m per roll) wound with tight
  • Compatible with Creality and Bambu Lab at 220°C with standard PETG settings
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Material PETG
Quick Answer

Why is this PETG easier to print than some others?

Our PETG-Basic is formulated with a balanced flow profile that reduces stringing and clogging at typical 220°C settings. Clean, consistent extrusion means fewer mid-print failures in single-color production runs.

Full answers below

Is it right for my project?

Best for: For reusable packaging, crates and bins that must survive repeated handling - available in 9 colours; 1kg spools; lead colour PETG White. Not ideal for: Avoid for very thin flexible walls; TPU or PP may suit that geometry better - available in 9 colours; 1kg spools; lead colour PETG White.

Print settings

Nozzle 230-260°C

01 · Why this one

Product highlights

3 reasons

Choose from a broad single-color range - black, silver, pink, yellow, gray, green, red, purple, plus fluorescent, metallic and skin-tone variants - so each product line keeps one consistent filament source.

1kg spools (340m per roll) wound with tight, even layering deliver dependable extrusion over the full length, cutting waste and surprises in batch production.

Compatible with Creality and Bambu Lab at 220°C with standard PETG settings, this basic-grade PETG is a dependable workhorse for shops standardizing on one filament.

Up Close

Gallery

Product Images

PETG Filament 1.75mm 1kg Single Color Smooth Flow Durable — Product ImagesPETG Filament 1.75mm 1kg Single Color Smooth Flow Durable — Product ImagesPETG Filament 1.75mm 1kg Single Color Smooth Flow Durable — Product ImagesPETG Filament 1.75mm 1kg Single Color Smooth Flow Durable — Product ImagesPETG Filament 1.75mm 1kg Single Color Smooth Flow Durable — Product ImagesPETG Filament 1.75mm 1kg Single Color Smooth Flow Durable — Product Images

Spec Sheet

PETG Filament 1.75mm 1kg Single Color Smooth Flow Durable — Spec Sheet

Close-up

PETG Filament 1.75mm 1kg Single Color Smooth Flow Durable — Close-up

Scene

PETG Filament 1.75mm 1kg Single Color Smooth Flow Durable — Scene
Technical Data

Specifications

Diameter 1.75mm
Material PETG

Print Profile

PETG Filament 1.75mm 1kg Single Color Smooth Flow Durable prints best at 230-260°C nozzle.

Nozzle Temp230-260°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.35 kg
Lengthapprox. 325m
Spool Size (L×W×H)20 × 20 × 7 cm
Pack FormatPiece
Spool TypeRound Spool

Attributes

Country / Regionchina
HS Code39169010
Item No.petg-filament-single-color-smooth-flow-durable-3d-printer
Product Name PETG-Basic
Grade None
Item No. NPETG087
Length 340m
Specification 19 colors available (see color chart)
Diameter 1.75mm
Length approx. 325m
Appearance Round Spool
Before You Ask

Frequently Asked Questions

Why is this PETG easier to print than some others?
Our PETG-Basic is formulated with a balanced flow profile that reduces stringing and clogging at typical 220°C settings. Clean, consistent extrusion means fewer mid-print failures in single-color production runs.
Will it run on my Creality or Bambu Lab printer?
Yes. It is 1.75mm PETG compatible with Creality, Bambu Lab, Prusa and Anycubic using the standard PETG preset - 220°C nozzle and a heated bed, no enclosure required.
What are the recommended print parameters?
Nozzle 220°C, bed 70-80°C, 0.4mm nozzle, walls 40-60mm/s. PETG generally prefers a slightly higher first layer and moderate speeds; a brim helps on smooth beds.
How long does a 1kg spool last?
Each 1kg spool holds about 340 meters of filament. Small parts print dozens of times per spool; larger housings fewer. Weigh your parts to budget material per production run.
Do the single colors stay consistent between spools?
Yes. The range spans black, silver, pink, yellow, gray, green, red and purple, with fluorescent, metallic and skin-tone variants available - all produced to controlled color standards so reorders match.
What speed range should I use?
40-80mm/s is the reliable band for quality; infill can go faster. Keep outer walls moderate to minimize stringing - a hallmark issue with cheaper PETG that this formulation addresses.
Is it for prototypes or end-use parts?
Both. Shops use it as a dependable workhorse for functional end-use parts - brackets, housings, guards - and for prototypes that need real durability while testing form and fit.
How is it packaged and stored?
Spools are sealed to limit moisture pickup, but store them dry with desiccant after opening. PETG is moderately hygroscopic; dry storage keeps extrusion smooth and parts strong.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on PETG Filament 1.75mm 1kg Single Color Smooth Flow Durable

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

How to Choose Filament for Functional Parts

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Dry PETG Filament (and Why It Matters)

→📐Guide

How to Prevent Stringing in 3D Prints

→📐Guide

How to Store 3D Printing Filament (Long-Term & Short-Term)

→