PLA Matte Zone PLA Matte Zone
[PLA Matte] Cream White [PLA Matte] Cream White
[PLA Matte] Almond Yellow [PLA Matte] Almond Yellow
[PLA Matte] Cement Gray [PLA Matte] Cement Gray
[PLA Matte Rainbow] Rainbow Gradient Color [PLA Matte Rainbow] Rainbow Gradient Color
PLA Basic Zone Easy to Print PLA Basic Zone Easy to Print

PLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set

Brand: Yiqiu3D · Model: PLA 1.75mm 8x250g · Color decisions stall when the only pack size is 1 kg: a buyer who needs six shades is asked to commit to six full rolls before seeing one printed part. This PLA Basic set is eight 250 g spools - 250 g per roll - so each shade can be printed, handled and judged on the machine before any volume order. 1.75 mm round diameter, 195-225 °C nozzle range, and every spool vacuum-sealed with a desiccant pack so the first test print starts dry.

  • Eight matte shades in each set of 250 g spools
  • each spool label carries its own color name
  • Published parameters: PLA
Get a Quote Order on Alibaba →
Compare filaments
Diameter 1.75mm
Tolerance ±0.03mm
Material PLA
Quick Answer

Why pack eight colors at 250 g instead of one 1 kg spool?

Because the risk sits in the color, not in the machine. Eight 250 g spools let a buyer print a real part in each shade, check the surface on their own build plate and only then commit to volume, while 1 kg spools suit production runs in a color already approved. The set totals 2 kg across eight colors, each spool 250 g net.

Full answers below

Is it right for my project?

Best for: Suitable for a wide range of prototyping and light-duty end-use parts - available in 11 colours; 250g spools; lead colour PLA Basic 8 Pack Set. Not ideal for: Not for heavy structural duty; a reinforced grade will perform better under load - available in 11 colours; 250g spools; lead colour PLA Basic 8 Pack Set.

Print settings

Nozzle 195-225°C · Bed 50-60°C

01 · Why this one

Product highlights

4 reasons

Eight matte shades in each set of 250 g spools, Black as the lead color. Because every color arrives as its own small spool, a shop, studio or school can hand one shade to each machine and finish a project without switching mid-print

each spool label carries its own color name, which keeps kitting lists and receiving counts straightforward.

Published parameters: PLA, 1.75 mm diameter, 195-225 °C nozzle range, round spool, 250 g net filament per spool. The 250 g spool is light enough for a standard desk-side holder, so compact printers and shared maker benches run it without an adapter. We do not publish a heated bed temperature for this grade - use your printer PLA profile for the first layer.

Fits standard 1.75 mm FDM printers and common spool holders, including Bambu Lab and Creality style machines - no heated chamber and no adapter needed for the 250 g spools. Keep the spare shades sealed while one runs, and check the remaining weight before an overnight job, because a 250 g spool empties quickly on a long print.

Up Close

Gallery

Product Images

PLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set — Product ImagesPLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set — Product ImagesPLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set — Product ImagesPLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set — Product ImagesPLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set — Product ImagesPLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set — Product Images

Spec Sheet

PLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set — Spec Sheet

Close-up

PLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set — Close-up

Scene

PLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set — Scene
Technical Data

Specifications

Diameter 1.75mm
Tolerance ±0.03mm
Material PLA

Print Profile

PLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set prints best at 195-225°C nozzle, 50-60°C bed.

Nozzle Temp195-225°C
Bed Temp50-60°C

Spool Specification

Spool details for your feeding and handling setup.

Gross Weight1.35 kg
Spool Size (L×W×H)21 × 21 × 7 cm
Pack FormatPiece

What You Receive

Color decisions stall when the only pack size is 1 kg: a buyer who needs six shades is asked to commit to six full rolls before seeing one printed part. This PLA Basic set is eight 250 g spools - 250 g per roll - so each shade can be printed, handled and judged on the machine before any volume order. 1.75 mm round diameter, 195-225 °C nozzle range, and every spool vacuum-sealed with a desiccant pack so the first test print starts dry.

  • Vacuum-sealed bag
  • Desiccant pack
  • Arrives dry and ready to print

Attributes

Country / Regionchina
HS Code39169050
Item No.pla-basic-pack-8x250g-color-trial
Applicable Scope Contact Customer Service
Main Processing Equipment Contact Customer Service
Data Format Contact Customer Service
Model/Spec Post-Processing
Scenario Bridge

Perfect for these projects

Consistent Filament Across 50+ Printers — From First Spool to the Last

View solution →

Jigs & Fixtures That Survive the Production Floor

View solution →
Before You Ask

Frequently Asked Questions

Why pack eight colors at 250 g instead of one 1 kg spool?
Because the risk sits in the color, not in the machine. Eight 250 g spools let a buyer print a real part in each shade, check the surface on their own build plate and only then commit to volume, while 1 kg spools suit production runs in a color already approved. The set totals 2 kg across eight colors, each spool 250 g net.
Will these 250 g spools fit my printer?
Yes - every spool is a standard round 1.75 mm spool weighing 250 g net, so it fits common FDM printers and standard spool mounts, including Bambu Lab and Creality style machines, without an adapter. If your printer uses a proprietary cartridge or a non-standard hub, send us the model name and we will confirm the fit before you order.
What print settings do you recommend?
Nozzle temperature 195-225 °C. We do not publish a heated bed temperature for this grade - start from your printer PLA profile and set the first layer to your build surface. Print the first part at the temperature you already use for PLA, then fine-tune with a temperature tower from one 250 g spool before running the shade you keep.
How much filament is in the set?
Eight spools at 250 g net each, so 2 kg of PLA in total and 250 g per roll. We do not publish a metre figure for the 250 g spools, because usable length varies with the diameter and density of the batch. If a job needs more than 250 g of one color, a trial set can be followed by a volume order in that shade.
What is this 250 g color set best used for?
Color sampling, shop and classroom kits, small-batch gifts, prototype runs across several shades and short jobs on compact printers where a 1 kg roll is more than one project needs. Buyers who already know the shade they want can move to 1 kg spools of the same PLA Basic grade for production volume.
How are the 250 g spools packed and stored?
Each 250 g spool is vacuum-sealed with a desiccant pack and packed in a plain export carton. Open a bag only when that shade goes on the machine, then reseal it or move the spool to an airtight container away from sunlight and damp floors. Small spools are opened and closed more often than 1 kg rolls, so keep the spare shades sealed.

Documentation & Downloads

Everything we publish for this material, in one place.

Ready to Order

Get factory-direct pricing on PLA Basic 8 Pack 250g 1.75mm 8x250g Color Trial Set

Not sure this is the right material? → Compare filaments
Get a Tailored Quote Order on Alibaba →

RELATED CONTENT

Explore more by topic

📐Guide

Silk PLA vs Matte PLA: Which Finish Is Right for Your Project?

→📦Product

PLA+ Premium

→📐Guide

Creality Ender 3 Print Settings for PLA and PETG

→📐Guide

First Layer Adhesion: The Foundation of Every Successful Print

→📐Guide

How to Fix PLA Warping — A Practical Guide

→📐Guide

How to Prevent Stringing in 3D Prints

→