Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
Basic Ice Blue 
Basic Klein Blue 
Basic Blue 
Basic Yellow 
Basic Green 
Basic M Mint Green Brand: Yiqiu3D · Model: 202608150000442 · Large flat parts are where a budget roll gives itself away: the corners lift off the plate and the base bows while the print is still running, and the reprint costs more than the roll saved. This Basic PLA Filament Warm White grade is a low-shrinkage, low-warp formulation - it is built to hold its printed dimensions through cool-down, so a bed-sized panel stays down and the second part still fits the first.
Because the build plate is where a cheap roll fails. PLA that keeps shrinking while it cools pulls the base upward at the corners and bows a bed-sized panel, and two parts printed from the same file can come off the plate at two sizes, which breaks any assembly they belong to. This grade is a low-shrinkage, low-warp formulation, so a large flat panel stays down and repeat parts stack the same way.
Full answers belowBest for: For quick visual mock-ups where print speed and surface quality beat mechanical strength - available in 9 colours; 1kg spools; lead colour Basic Warm White. Not ideal for: Avoid for parts that will sit in a hot car or take repeated knocks; PETG or ABS suits better - available in 9 colours; 1kg spools; lead colour Basic Warm White.
Nozzle 190-220°C · Bed 50-60°C
the shade list is confirmed with the supplier per order.
1.75mm diameter on a standard round spool, 1 kg net filament per spool, approximately 330 m of strand per spool, and a nozzle window of 190-220 °C. One window covers the whole shade range because only the pigment changes between colours, so a single slicer profile serves every colour on the shelf - fewer profiles to maintain and fewer first-layer surprises after a colour change.
Drop-in on the 1.75mm FDM machines buyers already run - Bambu Lab, Creality, Prusa and comparable printers - at ordinary PLA settings, with no enclosure and no hardened nozzle. The round spool seats in a standard holder or dry box without an adapter, and the strand is wound evenly so a nearly empty spool keeps feeding to the end of a long flat panel instead of snagging in the last few metres.
| Diameter | 1.75mm |
|---|---|
| Tolerance | ±0.03mm |
| Material | PLA |
Basic PLA 1.75mm 1KG prints best at 190-220°C nozzle, 50-60°C bed.
| Nozzle Temp | 190-220°C |
|---|---|
| Bed Temp | 50-60°C |
Spool details for your feeding and handling setup.
| Gross Weight | 1.3 kg |
|---|---|
| Length | 330 meters |
| Spool Size (L×W×H) | 20 × 5.5 × 20 cm |
| Pack Format | Piece |
| Country / Region | china |
|---|---|
| HS Code | 39169050 |
| Item No. | basic-pla-low-shrink-non-warping |
| Product Name | PLA Silk Filament |
| Cross-Section | Round |
| Application | 3DPrinting |
| Appearance | Circular |
| Length | 330 meters |
| Density | 1.26-1.4g/m3 |
Everything we publish for this material, in one place.
