Type to search products, guides, downloads and case studies — results appear as you type.
Suggested
12 solution paths
7 walkthroughs
Print Farm Scaling — Material Strategy Walkthrough 
Outdoor UV Stability — Enclosure Material Walkthrough 
Figurine Batch Consistency — Surface-Finish Walkthrough Educational Lab Deployment — Safe Material Walkthrough Industrial Jig Precision — Tolerance Walkthrough A European Print Farm — 40-Unit Consistency Overhaul A University Environmental Lab — Outdoor Sensor Enclosure 
PETG Skin Tone 
PETG Orange 
PETG Red 
PETG Peanut Brown 
PETG Green 
PETG Jungle Green Brand: Yiqiu3D · Model: PETG · PLA parts soften in a hot car or crack under stress? PETG delivers the toughness and heat resistance of ABS without the warping and fumes, so practical parts survive real daily use.
PETG's glycol-modified PET chemistry gives it higher impact strength, better chemical resistance and a higher softening point than PLA, while printing with far less warping and odor than ABS.
Full answers belowBest for: For durable, moisture- and chemical-resistant parts - outdoor enclosures, brackets and water-adjacent jigs - available in 9 colours; 1kg spools; lead colour PETG White. Not ideal for: Not for high-temperature engine-adjacent parts; use ABS or PC above ~70C - available in 9 colours; 1kg spools; lead colour PETG White.
Nozzle 230-260°C
Skin Tone, Yellow, Orange, Red, Peanut Brown, Lemon Green, Green and Jungle Green — cover product and decor needs with clean, consistent tone.
Export buyers hate tangled rolls that cost them time? Every spool is machine-wound with neat, even layering and laser-measured 1.75 mm diameter, so it unwinds cleanly from first meter to last.
PETG that's famous for being fussy? Rated 220 °C and tuned for Creality and Prusa workflows, this blend prints with balanced settings and minimal stringing for a tough, glossy result.
| Diameter | 1.75mm |
|---|---|
| Material | PETG |
Yiqiu3D PETG Filament 1.75mm 1kg prints best at 230-260°C nozzle.
| Nozzle Temp | 230-260°C |
|---|
Spool details for your feeding and handling setup.
| Gross Weight | 1.5 kg |
|---|---|
| Length | approx. 325m |
| Spool Size (L×W×H) | 21 × 21 × 7 cm |
| Pack Format | Piece |
| Spool Type | Round Spool |
| Country / Region | china |
|---|---|
| HS Code | 39169010 |
| Item No. | petg-filament-3d-printer-filament-tough-impact-resistant |
| Diameter | 1.75mm |
| Length | approx. 325m |
| Appearance | Round Spool |
Everything we publish for this material, in one place.
